Engine
- E-fan make fuel consumption better, 3 speeds auto-selection depend on coolant temperature
- 3 stages air cleaner with 93% efficiency pre-cleaner reduce earlier wearing, high efficiency fuel filter make engine work in good condition
- Cat technology damping mount reduce vibration failure. Four air valves delivers robust power
- Radial seal air filter makes the maintenance easier and with good reliability
Hydraulic System
- Single load sensing system, high productivity and high fuel efficiency
- Piston pump, lower heat load contribution and provide more rim pull when hydraulic partial working
- Less hydraulic oil capacity required because provide flow depends on demand
Operator Station
- Mould formed cab with all trims design and more vents with HVAC make operator feel better
- First class premium seat with suspension adjustable, arm rest and safety belt. Up-down, forward and reverse adjustable
- Caterpillar method design damping mount reduce vibration failure
- Slide window, fresh air inlet system make environment better
Drivetrain
- Improve transmission oil system efficiency, machine fuel consumption reduced
- marc mount reduce vibration
- Made in house axle well fitted heavy duty application
- Caterpillar design drive shaft and block bearing make machine more reliable
Cooling System
- High performance aluminum cooling package suitable for most severity applications
- Oil cooler and radiator parallel design can balance heat load inside and suitable diversity applications
- Damping design reduce vibration failure
- High ambient 50°C cooling package make machine reliability better
Solid Structure
- Validated by Cat method FEA (Finite Element Analysis) and OMSA (On Machine Stress Analysis)
- Middle articulation frame less work space needed, reduce tire wearing and fuel consumption
- Large thread design in articulation section improves load capacity
Serviceability
- Quick pressure test ports on hydraulic (SOS) and brake air lines make diagnose easier
- Large wing hood door make service easier, approach to air cleaner, fuel filters and oil filters
- Large thread design in articulation section make operator easier to approach
- Air tank with pressured air tap provide more convenience for service and maintenance
Safety
- High decibel beacon and backup alarm make person around easy to attention
- 3 stages alarm system on panel make operator easy to notice
- 3 points touch entering and exit cab make operator more safely
Machine Applications
- Landscaping, building, sewer/water tie-in, local utility construction Ready mix cement/concrete products, quarry/stone, clay, recycled aggregate, sand and gravel
- Highway, street, tunnel, airport, residential commercial
| Model |
|
| Model |
SEM658D Weichai |
SEM658D Cummins |
SEM658D for EAEU |
SEM658D Wet Axle |
| Main Specifications |
|
| Rated Payload |
5,000kg |
5,000kg |
5,000kg |
5,000kg |
| Operating Weight with Standard Bucket |
17,158kg |
17,084kg |
17,347kg |
17,100kg |
| Bucket Capacity |
2.6-4m³ |
2.6-4m³ |
2.6-4m³ |
2.6-4m³ |
| Operating Specifications |
|
| Breakout Force |
178kN |
178kN |
178kN |
178kN |
| Max. Drawbar Force |
170KN |
169KN |
170kN |
163KN |
| Transmission |
|
| Transmission Gears |
F4/R3 |
F4/R3 |
F4/R3 |
F4/R3 |
| Torque Converter Type |
Single Stage, 3 Elements |
Single Stage, 3 Elements |
Single Stage, 3 Elements |
Single Stage, 3 Elements |
| Max Speed |
37km |
37km |
37km |
37km |
| Maker & Type |
SEM160 |
SEM160 |
SEM160 |
SEM160 |
| Axle (Axle, Tire & Brakes) |
|
| Rear- oscillation +/- |
±11° |
±11° |
±11° |
±11° |
| Engine |
|
| Engine Model |
WD10G220E21 |
Cummins 6LTAA9.3 |
WD10G220E21 |
WD10G220E21 |
| Rated Power |
162kW |
162kW |
162kW |
162kW |
| Rated Speed |
2,200r/min |
2,200r/min |
2,200r/min |
2,200r/min |
| Displacement |
9.7L |
9.3L |
9.7L |
9.7L |
| Emission |
T2/Stage2 |
T2/Stage2 |
T2/Stage2 |
T2/Stage2 |
| Implement Hydraulic System |
|
| Implement System Type |
Open Center |
Open Center |
Fixed Flow Open Center |
Single Load Sensing |
| Hydraulic Cycle Time |
9.3s |
9.3s |
9.3s |
9.3s |
| System Pressure Setting |
18Mpa |
18Mpa |
18Mpa |
18Mpa |
| Raise |
5.3s |
5.3s |
5.1s |
5.13s |
| Brake System |
|
| Service Brake |
Air to Oil Control |
Air to Oil Control |
Air to Oil Control |
Web Brake / Air to Oil Control |
| Parking Brake |
Drum / Shoe |
Drum / Shoe |
Drum / Shoe |
Drum/Shoe |
| Service Refill Capacity |
|
| Fuel Tank |
252L |
252L |
252L |
|
| Engine Lubricating Oil |
21L |
21L |
21L |
|
| Hydraulic System |
165L |
165L |
165L |
|
| Transmission Oil |
45L |
45L |
45L |
|
| Tires |
|
| Size |
23.5-25 |
23.5-25 |
23.5-25 |
23.5-25 |
| Type |
PR16 Bias |
PR16 Bias |
PR16 Bias |
PR16 Bias |
Fanbuzhe Group (Hong Kong) has two subsidiaries, Chongqing Fanbuzhe Soft Outfit Design Co., Ltd. and Chongqing Middle International Trade Co., LTD. Chongqing Fanbuzhe Soft Outfit Design Co., Ltd. was established in 2014, and its main business is engaged in domestic trade and construction of soft decoration materials.
In 2018, the company switched to the international market and started international trade.
In 2019, it officially entered the construction machinery and mining machinery industry. Chongqing Middle International Trade Co., Ltd. was established in 2020, mainly engaged in cross-border export trade.
Our company mainly develops the African market, and we have the stable customer group in Zambia, Cameroon, Central African Republic, Nigeria Ireland, Cote d 'Ivoire and other African countries. Our company is the agent of Caterpillar and SEM in the Central African Republic market, and has established a deep cooperation model with the domestic first-line brands such as Sany Heavy Industry and SEM.
Customer Visiting
FAQ
Q1. What is your terms of packing?
A: Generally, our cargo is suitable for naked or waxed packing, in container or bulk ship or RO-RO ship according to the size of the cargo.
Q2. What is your terms of payment?
A: T/T 50% as deposit, and 50% before delivery.
We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the
courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Audited Supplier 
){kind=link}
){kind=link}