SEM Tandem Axle
- Leveraging Caterpillar designing and experience on MG tandem axle
- Improved bearing Layout and optimized load distribution with 4 planetary gears final drive
- Less down time and reduced labor and service cost for maintenance and repairing
- Longer service interval for lubrication oil change
- Leading in class manufacturing and quality control level, mandatory performance testing before delivering to MG assembly line
Control System
- 7 position link bar with electric over hydraulic control allows ease of operation from within the cab
- Optimum blade reach capability, quick DCM re-positioning for greater reach for better working on high bank side slope
- The link bar is essential for extending reach capability when cutting a bank slope or back slope of a ditch
- Replaceable bushings reduce service time and cost
Blade Float
- Standard blade float function allows blade to lower without hydraulic pressure for increased versatility
- Blade float is engaged by pushing the left and right lift cylinder controls all the way forward past the detent
- Provides protection for machine and pavement during snow removal and snow plowing
Hydraulic System
- Proportional Priority Pressure Compensating (PPPC) Valves contain specifically cut spools for motor grader applications, continuously matching of hydraulic flow and pressure to power demands, allowing ease of multi-function control for optimizing working efficiency
- World-class variable displacement piston pump, efficiently reduces power consumption and hydraulic system heat, improving fuel efficiency
- Load-sensing hydraulic system provides consistent and precise blade movement, improving finishing performance
- Inboard lock check valves within PPPC, prevents inadvertent cylinder movement and potential leaks
Drawbar
- A-frame tubular design drawbar provides maximum strength and durability
- Replaceable drawbar draft ball (bolted - not welded) for less service time and cost
- Easy removal of wear shims to adjust drawbar
Front Frame
- Flanged box section design removes welds from high stress areas, improving reliability and durability
- Continuous top and bottom plate construction provides consistency and strength, improving front frame durability
- Hydraulic hose routing minimizes exposure to damage and provides quick access for service
- Maintenance-free bushings improve durability and reduce overall service cost
Control Layout
- Short throw levers are efficiently spaced, allowing ease of multi-function control
- Short lever travel (40mm) with low lever effort reduces operator fatigue
Large Cab
- High performance dashboard with 3 levels alarming monition system
- Cab mounted on the front frame provides exceptional view to blade and front axle even during articulation
- Large cab with 1.9m height and 30% larger space than most competitors, provides exceptional comfort
| Operating Specifications |
|
| Top Speed, Forward |
40kph |
| Top Speed, Reverse |
25kph |
| Min. Turning Radius |
7,800mm |
| Articulation Angle, Left /Right |
20° |
| Gradeability |
30° |
| Wheelbase |
6,140mm |
| Travel Speed, Forward |
5.3/9.1/12/20/25/40kph |
| Travel Speed, Reverse |
5.3/12/25kph |
| Drawbar Pull |
90kN |
| Engine |
|
| Engine Manufacturer |
SDEC |
| Engine Model |
SC9DK220G2 |
| Rated Power |
162 @ 2,200kW @ RPM |
| Max. Torque |
920 @ 1,400kN @ RPM |
| Emission |
Tier 2 |
| Displacement |
8.82L |
| Bore |
114L |
| Stroke |
144L |
| Number of Cylinders |
6 |
| Transmission |
|
| Brand / Manufacturer |
Hangchi |
| Type |
6WG180 |
| Powershift Pressure |
1,3~1.7MPa |
| Forward / Reverse Gears |
6 Forward / 3 Reverse |
| Parking Brake |
/ |
| Tandem Axle |
|
| Brand / Manufacturer |
SEM / Caterpillar |
| Model |
SEM ST23 |
| Differential |
No-Spin |
| Service Brake |
Air to Oil, Disc |
| Secondary |
Dual Circuit |
| Oscillation Front Up |
15° |
| Oscillation Front Down |
25° |
| Front Axle |
|
| Ground Clearance |
602mm |
| Wheel Lean, Left / Right |
±18° |
| Max. Oscillation |
±16° |
| Steering Range, Left / Right |
±47.5° |
| Hydraulic System |
|
| Circuit Type |
Load sensing, PPPC |
| Pump Type |
Variable Piston |
| Max. Pump Output |
162.8L/min |
| Max. System Pressure |
22MPa |
| Standby Pressure |
2.4~2.6MPa |
| Powershift Pressure |
/ |
| Moldboard |
|
| Blade Width, Standard |
4,279mm |
| Blade Width, Optional |
3,669/3,974mm |
| Moldboard Height |
610mm |
| Moldboard Thickness |
25mm |
| Throat Clearance |
85mm |
| Float Function |
STD |
| Moldboard Sideshift, LH |
948.5mm |
| Moldboard Sideshift, RH |
824.5mm |
| Circle Centershift, LH |
926mm |
| Circle Centershift, RH |
758mm |
| Max. Blade Position Angle |
90° |
| Blade Tip, Forward |
40° |
| Blade Tip, Backward |
5° |
| Blade Cutting Angle |
/ |
| Max. Shoulder Reach outside of Tires, LH |
2,698mm |
| Max. Shoulder Reach outside of Tires, RH |
2,407mm |
| Max. Lift above Ground |
475mm |
| Max. Cutting Depth |
715mm |
| Service Refill Capacity |
|
| Fuel Tank |
320L |
| Engine Oil |
22L |
| Coolant |
65L |
| Transmission |
28L |
| Differential Case |
33L |
| Tandem Case, Each Side |
62L |
| Circle Drive, Non Slip Clutch |
2L |
| Circle Drive, With Slip Clutch |
7L |
| Hydraulic Oil Tank |
55L |
| Rear Axle (Main Reducer & Tandem) |
157L |
Fanbuzhe Group (Hong Kong) has two subsidiaries, Chongqing Fanbuzhe Soft Outfit Design Co., Ltd. and Chongqing Middle International Trade Co., LTD. Chongqing Fanbuzhe Soft Outfit Design Co., Ltd. was established in 2014, and its main business is engaged in domestic trade and construction of soft decoration materials.
In 2018, the company switched to the international market and started international trade.
In 2019, it officially entered the construction machinery and mining machinery industry. Chongqing Middle International Trade Co., Ltd. was established in 2020, mainly engaged in cross-border export trade.
Our company mainly develops the African market, and we have the stable customer group in Zambia, Cameroon, Central African Republic, Nigeria Ireland, Cote d 'Ivoire and other African countries. Our company is the agent of Caterpillar and SEM in the Central African Republic market, and has established a deep cooperation model with the domestic first-line brands such as Sany Heavy Industry and SEM.
Customer Visiting
FAQ
Q1. What is your terms of packing?
A: Generally, our cargo is suitable for naked or waxed packing, in container or bulk ship or RO-RO ship according to the size of the cargo.
Q2. What is your terms of payment?
A: T/T 50% as deposit, and 50% before delivery.
We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the
courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Audited Supplier 
){kind=link}
){kind=link}